Water In Oil Detect
This Water In Oil(HW-2100) is the equipment to measure the Relative Content of Water in Fuel Oils and Lubricant
Oils used in Maritime Engines. HW-2100 is installed at the outlet pipe of a purifier(Separator) and measure relative
content of water in purified oil. The measured relative content of water is displayed on the indicator in real time.
HW-2100 is composed of a sensor module, an indicator and a cable assembly.
The measured result by the sensor module is transferred to the indicator by RS485.
Measuring Range : 0 ~ 1.60% (Relative Content of Water)
Measuring Error : 2.5% Full Scale
Display Resolution : 0.01%
Response time : 5 sec.
Output Signal : 4 ~ 20mA / Alarm (Dry-contact, COM-NO, 32V/1A) / RS485, RS422, CAN Communication (Option)
Sensor Module Operating Temperature Range : 0°C~110°C
Power Supply : DC24V
Alarm Limit : Default 0.3%, User-settable
Operating Temperature : 0°C~110°C
Ingress Protection : IP 65
Inductive Conductivity Sensor
This Inductive Conductivity Sensor(ICS-1000) is the equipment specially designed to measure the conductivity in
the solution. ICS-1000 sensor measures conductivity of seawater flowed through the certain pipe. The result of
measurement(Conductivity and Temperature) is indicated on the indicator(ICS-1000M). The indicator outputs
conductivity and temperature as the Current Loop of 4mA-20mA.
Data Communication is using RS485(NMEA0183) between ICS-1000 sensor and ICS-1000M indicator.
Measurement Range : 0mS/cm ~ 100mS/cm
Measurement Error : ≤ 5% Max of measured value including Temperature Compensation
Current Output Error : ≤ 2% of full measured range
Repeatability : ≤ 1% of measurable full scale
Arrival Time for Target Temp: ≤ 10 minutes
Output Signal : Current loop 4mA ~ 20mA (Default) / RS485 Communication (Option)
Power Supply : DC24V ( 18V ~ 30V)
Power Consumption : 5W Max
Operating Temperature : -10°C ~ 70°C
Operating Pressure range : 10 bar Max.
Ingress Protection : IP65
Electromagnetic Compatibility : Satisfied EN61326 rule